Dahua KTP03 User Manual

50
Mode
Select arm mode in every tab.
Tap in every area to add it into arm mode.
Multiple areas can be added into one arm mode simultaneously, whereas one area can be
added into different modes.
4.6.5 Forward Setting
Forward incoming calls.
Parameters at this interface are set on main VTH only, and extension VTH synchronizes with main
VTH.
Tap Setting.
Enter login password and tap OK.
Default login password is 123456. Please refer to 4.6.6.3 Password Setting for details.
Tap Forward.

Dahua KTP03 Specifications

General

Brand	Dahua
Model	KTP03
Category	Intercom System
Language	English