61
Arm and Disarm Function
4.9.1 Arm
In case of triggering alarm after arm, produce linkage alarm and upload alarm info.
Please ensure that the area has been added into arm mode. Otherwise, there will be no alarm
triggering after arm.
Please ensure that it is in disarmed status. Otherwise, arm will fail.
Tap at the main interface.
Arm mode
Select arm mode.
Enter arm and disarm password; tap OK.
The device beeps continuously, which represents successful arm. The key displays
corresponding arm mode.
Default password of arm and disarm is 123456. Please refer to 4.6.6.3 Password Setting
for details.
If delay alarm is set in the area, the device will beep continuously at the end of exit delay
time.
To Next Page
Loading...
Need help?
General
