48
Tap OK to complete setting.
4.6.3.2 Wireless Zone
Only devices with wireless function have this function.
Add, delete and set wireless zones.
Tap Setting.
Enter login password and tap OK.
Default login password is 123456. Please refer to 4.6.6.3 Password Setting for details.
Select Alarm > Wireless Zone.
Wireless zone
Tap Add.
Tap wireless code button of wireless device. See wireless device user’s manual for details.
After successful coding, display area info.
Tap corresponding positions to set alarm status, enter delay and exit delay. See Table 4-6 for
details.
Tap Edit to select a zone and Delete to delete the selected area.
4.6.3.3 Alarm Output
After enabling alarm output, when other devices call this VTH, the alarm output device will output
alarm info.
Tap Setting.
Enter login password and tap OK.
To Next Page
Loading...
