56
Other
Set parameters.
Table 4-8 Parameter description
Parameter Description Operation
Monitor Time Maximum time to monitor VTO, IPC and fence station.
Tap
and
to
time.
Record Time
Maximum recording time of videos during call, talk, monitoring
and speaking.
The system stops recording at the end of
recording time.
VTO Message Time
When VTO Message Time(s) is not 0:
If the VTH has an SD card and does not answer the
VTO, it will enter message status according to prompt,
and save the message in the SD card.
If VTH does not have SD card, and the leave message
upload function is not enabled on the VTO, the call
will be hung up automatically if the VTH does not
answer the VTO.
When VTO Message Time(s) is 0:
In any situation, the call will be hung up automatically if
the VTH does not answer the VTO.
If VTO sets to forward the call to management center, if VTH
doesn’t answer when VTO calls, and there is no message
prompt, the call will be forwarded to management center.
Resident-to-
resident Call Time
Maximum talk time between VTH and VTH.
VTO Talk Time Maximum talk time when VTO calls VTH.
To Next Page
Loading...
Need help?
General
