User's Manual
264
Procedure
Step 1 Select
Main Menu
>
AI
>
Parameters
>
Heat Map
.
The
Heat Map
interface is displayed. See Figure 4-159.
Figure 4-159
Step 2 Select a channel number and then check the box to enable the function.
Step 3 Click
Setting
.
The
Setting
interface is displayed. See Figure 4-160.
Figure 4-160
Step 4 Set arm/disarm period. There are two modes for you to set the period so that the system
can detect the specified zone.
●
Define the period by drawing.
Select the corresponding date and then use mouse to drag the bar to set period.
◇
Define for the whole week: Click next to
All
, all the icon switches to , you can
define the period for all the days simultaneously.
To Next Page
Loading...
Need help?
General
