User's Manual
363
availability, and performance grade.
Background Information
You can manually create RAID or just one click one button to create RAID. For creating RAID
function, you can select the physical HDD that does not included in the RAID group or the created
disk array to create a RAID5. You can refer to the following situations:
●
There is no RAID, no hotspare disk: System directly creates the RAID5 and creates one hotspare
disk at the same time.
●
There is no RAID, but there is a hotspare disk: System creates the RAID5 only. It uses previous
hotspare disk.
●
There is RAID: System cancel the previous RAID setup and then create the new RAID5. System
creates the hotspare disk if there is no one. System uses previous hotspare disk if there is
hotspare disk available.
●
The background will format the virtual disk.
You can create different types of RAID as needed.
Procedure
Step 1 Right-click on the live view interface, and then select
Main Menu
>
STORAGE
>
RAID
>
RAID
.
The RAID interface is displayed. See Figure 4-247.
Figure 4-247
Step 2 You can click
Create RAID
or
Create Manually
, and all the disks involved will be
formatted.
●
Click Create RAID, the system will create RAID automatically.
To Next Page
Loading...
Need help?
General
