Figure 5-21
Step 2. Select one mode from Stay, Away, Sleep and Custom.
Step 3. In pop-up arm interface, enter arm password.
Device generates tone, which means successfully armed.
Note:
Initial arm password is 123456.
Disarm
Step 1. In homepage, press designated mode to disarm.
Step 2. Press .
Step 3. In pop-up disarm interface, enter disarm password.
If password is correct, it will inform successfully disarmed. If password is wrong, it will ask
you to enter password again.
Note:
Initial disarm password is 123456.
Please refer to Ch 5.2.5.4 to change arm/disarm password.
Warning:
In emergency situation, if you are forced to enter disarm password, you can enter
duress password, so the system alarm stops working, but the device will auto send
alarm to MGT center/platform.
Default duress password is 654321.
To Next Page
Loading...
