Step 4. Please refer to Chart 5-3 and complete operation.
5.5.3 Favorite
If one VTH monitors more than one VTO or IPC at the same time, you can go to Door or IPC
interface, select the VTO or IPC you monitor the most frequently, and press to add them
into Favorite.
See Figure 5-20. You can go to Monitor>Favorite interface to monitor corresponding VTO and
IPC.
Figure 5-20
5.6 Arm/Disarm
Arm: After arming is enabled, device enters arming status; when alarm is detected, device
generates alarm locally and upload alarm.
Disarm: After disarming is enabled, device exits arming status.
Arm
Step 1. In homepage, press . See Figure 5-21.
To Next Page
Loading...
Need help?
General
