5.2.5 General
Go to Setting>General, set VTH time, password, display and etc.
5.2.5.1 Time
Go to Setting>General>Time, set VTH time.
Step 1. Select Setting>General>Time.
Step 2. Press enable system time.
Now device system time and VTO time are synced.
You also may modify system time and set time zone, this time will not be synced with VTO.
See Figure 5-7.
Figure 5-7
5.2.5.2 Display
Go to>Setting>Display, press or to adjust screen brightness and screen saver.
Press clean to lock screen for 10 seconds and now you can clean up the screen.
5.2.5.3 Password
Go to Setting>General>Password, you can modify setting page password , personal unlock
password and arm/disarm password.
To Next Page
Loading...
