Dahua VTO2202F - Adding Room Numbers to SIP Server

Configuration 14
which a VTO device works as SIP server, and if you are using other servers as SIP server, see
the corresponding manual for the detailed configuration.
Log in the web interface of the SIP server, and then select Household Setting > VTO
Step 1
No. Management.
The VTO No. Management interface is displayed. See Figure 4-9.
VTO No. management Figure 4-9
Click Add. Step 2
The Add interface is displayed. See Figure 4-10.
Add VTO Figure 4-10
Configure the parameters, and be sure to add the SIP server itself too. See Table 4-2. Step 3
Table 4-2 Add VTO configuration
Parameter
Description
Rec No.
The VTO number you configured for the target VTO. See the
details in "4.3.2 Configuring VTO Number."
Register Password
Keep default value.