14 | Technical data
Installer reference guide
222
ERGA04~08DAV3(A) + EHBH/X04+08DA*V7
Daikin Altherma 3 R W
4P618958-1 – 2020.03
INFORMATION
▪ H = Height measured from the bottom of the casing to the floor.
▪ For intermediate H values (i.e. when H is between two H values from the table),
consider the value that corresponds to the lower H value from the table. If
H=1450mm, consider the value that corresponds to "H=1400mm".
▪ Systems with a total refrigerant charge (m
c
) <1.84 kg (i.e. if the piping length is
<27 m) are NOT subjected to any requirements to the installation room.
▪ Charges >1.9kg are NOT allowed in the unit.