Daikin Altherma EHBH08DA6V7 - 7.4 Mounting the indoor unit; 7.4.1 About mounting the indoor unit; 7.4.2 Precautions when mounting the indoor unit; 7.4.3 To install the indoor unit

7 | Installation
Installer reference guide
76
ERGA04~08DAV3(A) + EHBH/X04+08DA*V7
Daikin Altherma 3 R W
4P618958-1 – 2020.03
3 Insert a rubber sheet between the cables and the outdoor unit to prevent the
cables from scratching the paint (field supply).
4 Attach the ends of the cables.
5 Tighten the cables.
7.4 Mounting the indoor unit
7.4.1 About mounting the indoor unit
When
You have to mount the outdoor and indoor unit before you can connect the
refrigerant and water piping.
Typical workflow
Mounting the indoor unit typically consists of the following stages:
1 Installing the indoor unit.
7.4.2 Precautions when mounting the indoor unit
INFORMATION
Also read the precautions and requirements in the following chapters:
▪ General safety precautions
▪ Preparation
7.4.3 To install the indoor unit
1 Fix the wall bracket (accessory) to the wall (level) with 2 Ø8mm bolts.