Daikin Altherma EHBH08DA6V7 - 7.9.7 To connect the electrical wiring to the indoor unit

7 | Installation
Installer reference guide
95
ERGA04~08DAV3(A) + EHBH/X04+08DA*V7
Daikin Altherma 3 R W
4P618958-1 – 2020.03
a Interconnection cable
b Power supply cable
c Fuse
d Earth leakage circuit breaker
1 2 3
L N
L N PWR
12 3
3×
a
a Wire clamp
4 Reattach the switch box cover.
5 Optional: Attach the wire clamp (accessory) to the screw of the refrigerant
piping cover, and fix the cables to it with a cable tie.
1×
1×
6 Connect an earth leakage circuit breaker and fuse to the power supply line.
7.9.7 To connect the electrical wiring to the indoor unit
1 Open the switch box so that you can access the back of the switch box. See
"7.2.3To open the indoor unit"[468].
2 Route the wiring as follows:
▪ Enter the unit from the bottom.
▪ Route the wiring via the back of the switch box.
▪ Fix the cables with cable ties to the cable tie mountings at the back of the
switch box.