Daikin BRC1E51 - 6. Reattach the upper part of the remote controller; 7. Power on

BRC1E51
Remote controller
4PW52905-1
Quick reference
4
6. Reattach the upper part of the
remote controller
Refer to figure 3:
Align the upper case with the tabs of the lower case
(6 points), inset and install the upper case.
First begin fitting from the clips at the bottom.
7. Power on
1 Put on the power.
2 Connection under check Please wait for a moment is
displayed.
3 After a few seconds, the basic screen is
displayed.
If controlling one indoor unit or one group of
indoor units with two remote controllers
1 Put on the power for both remote controllers.
2 Determine which one is the sub/main remote
controller.
3 When Error code:U5 - Connection under check Please
wait for a moment is displayed on both remote
controllers, push and hold the button of
the sub remote controller for 4 seconds.
4 The sub remote controller now displays Sub
remote contrl.
5 After a few seconds, the basic screen is
displayed.
Be careful not to pinch the wiring when
attaching.
NOTE 1. The switch box and wiring for
connection are not included.
2. Do not directly touch the PCB with
your hand.
Connection under check
Please wait for a moment
Off reminder Timer
Main remote contrl
NOTE The main remote controller still displays
Main remote contrl.
Connection under check
Please wait for a moment
Error code:U5
Main remote contrl
Connection under check
Please wait for a moment
Sub remote contrl