BRC1E51
Remote controller
4PW52905-1
Quick reference
6
3 Use the buttons to select the desired
Mode.
4 During group control, when setting by each
indoor unit (Mode 20, 21, 22 and 23 have been
selected), push the button to highlight and
buttons to select the INDOOR UNIT NO.
to be set. This operation is unnecessary when
setting by group.
5 Highlight the second code No. to be changed
using the buttons, and use the
buttons to select the desired second code No.
6 Push the button to display the
confirmation screen.
7 Use the buttons to select Ye s and push
the button.
8 Push the button two times to return to
basic screen.
Notes
NOTE When setting by group, all of the second
code No. that may be set are displayed
as “*”.
NOTE When multiple setting changes are
needed, repeat steps 3 to 7.
To Next Page
Loading...
