Daikin CTXG25K2VMW - Reduction Motor; Limit Switch

Reduction Motor / Limit Switch Si041256
10 Removal Procedure
6. Reduction Motor / Limit Switch
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure Points
1
Cut the clamp of the
front panel mechanism
ASSY (right).
2
Release the harness
from the 4 hooks.
3
Pull out the terminals of
the limit switch.
4
Remove the screw of
the reduction motor.
5
Remove the reduction
motor by turning it
counterclockwise.
6
Remove the limit
switch.
(R18169)
Hook
(R12106)
Limit switch
(R18170)
Reduction motor
Limit switch
(R12109)