Daikin FDMQ-R Series Service Manual

Functions for FTX, FVXS Series SiUS091601EA
47 Part 4 Functions and Control
Caution
FVXS series
3-D Airflow FTX18/24UVJU only
Alternative repetition of vertical and horizontal swing motions enables uniform air-conditioning of
the entire room.
When the horizontal swing and vertical swing are both set to automatic operation, the airflow
becomes 3-D airflow. The horizontal and vertical swing motions are alternated and the airflow
direction changes in the order shown in the following diagram.
(1) The vertical blades (louvers) move from the right to the left.
(2) The horizontal blades (flaps) move downward.
(3) The vertical blades (louvers) move from the left to the right.
(4) The horizontal blades (flaps) move upward.
Airflow Selection
Setting
FVXS Series
Airflow direction can be set with the airflow selection switch.
 Open the front panel.
Before opening the front panel, be sure to stop the operation and turn the breaker off.
Do not touch the aluminum fins (indoor heat exchanger) inside the indoor unit, as it may result in
injury.
Flap (up and down)
Cooling/Dry Heating
Upward airflow
limit OFF
R4003397
R4003396
Upward airflow
limit ON
R4003394 R4003394
25°
90°
40°
90°
90°
20°
90°
20°
(R19554)
(2)
(4)
(3)
(1)
Air is blown from the upper outlet only.
Front panel


The blow pattern is automatically decided
depending on mode and conditions.
(Recommended and factory set.)
(R17866)

Daikin FDMQ-R Series Specifications

General

Brand	Daikin
Model	FDMQ-R Series
Category	Air Conditioner
Language	English