3. ARC466A37
Refer to the following pages for details.
< ARC466A37 >
• Starts POWERFUL operation.
Powerful
1
button
On/Off button
• Press this button once to start
operation.
Press once again to stop it.
Display (LCD)
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
FAN setting button
• Selects the airflow rate setting every
time you press this button.
• In indoor unit quiet operation,
operation sound becomes weak.
(The airflow rate also decreases.)
• In DRY operation, the airflow rate
setting is not available.
Auto Indoor unit quiet Low
Middle low
MiddleMiddle highHigh
Temperature adjustment
buttons
• Changes the temperature setting.
: AUTO
: DRY
: COOL
: HEAT
: FAN
Not available
Not available
64 ~ 86˚F
(18 ~ 30˚C)
64 ~ 90˚F
(18 ~ 32˚C)
50 ~ 86˚F
(10 ~ 30˚C)
Signal transmitter
• To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
• The maximum distance for
communication is about 23 ft (7m).
Receiver
To Next Page
Loading...
