Daikin FTE09MV2S - Page 11

Si041138 Removal of Horizontal Blades / Vertical Blades
Removal Procedure 9
2. Remove the horizontal
blade (small).
1
Unfasten the center
shaft while bending the
horizontal blade (small)
slightly.
2
Unfasten the left shaft.
3
Unfasten the right shaft.

There is a key alignment at
the right shaft. When
reassembling, insert the right
shaft first while turning.

After inserting the right shaft,
mount the horizontal blade to
the center shaft and then to
the left shaft.
Step Procedure Points
(R4859)
Horizontal blade (small)
(R4330)
Key alignment
(R15361)