Daikin FTE35KV16 - Remove INTELLIGENT EYE Sensor PCB

Removal of PCBs Si041048
16 Removal Procedure
6. Remove the
INTELLIGENT EYE
sensor PCB.

Some models have no
INTELLIGENT EYE sensor
PCB.
1
2
3
Remove the
INTELLIGENT EYE
fixing plate by twisting
it.
Unfasten the right 3
hooks and remove the
INTELLIGENT EYE
sensor PCB.
There are also 2 hooks
on the left side.
Disconnect the
connector [S36] from
the INTELLIGENT EYE
sensor PCB.
Step Procedure Points
(R4363)
(R4364)
INTELLIGENT EYE
fixing plate
INTELLIGENT EYE
sensor PCB
(R4365)
[S36]