SiUS04-904 FTXS09/12HVJU
162 Removal Procedure
1.4 Removal of Electrical Box, PCB and Swing Motor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembly work.
Step Procedure Points
Remove the front grille.
1. Removal of the electrical
box.
1
2
3
4
Disconnect the
connection wires.
Disconnect connectors
(S1 and S7) of fan motor.
Disconnect one connector
(S6) of swing motor.
Remove heat exchanger
thermistor.
Pay attention to the direction
of the retainer of the
thermistor so that the retainer
does not touch the harness
(The same as the existing
models.)
To Next Page
Loading...
