SiUS04-904 RXS09/12DAVJU, RX09/12FAVJU
218 Removal Procedure
3.5 Removal of Four-Way Valve
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembly work.
Step
Procedure Points
1. Removal of the peripheries.
1
Remove the electronic
expansion valve coil.
2
Remove the terminal
cover.
Remove the four-way valve
and the sheets of putty so as
not to burn them.
Be careful so as not to burn
the compressor terminals or
the name plate.
Make a note.