Daikin FTXS09HVJU - Removal of PCB

RXS09/12DAVJU, RX09/12FAVJU SiUS04-904
Removal Procedure 223
3.7 Removal of PCB
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembly work.
Step
Procedure Points
1. Removal of the PCB.  You can remove the PCB
when you disconnect the read
wires on the terminal board
without removing the electrical
box.
 PbF (Pb free brazing) is
adopted.
 See page 19 for detail.
1
Feature of the PCB
2
Remove the screw on the
terminal board.
3
Release the 2 ground
terminals.
(R7255)
(R10014)
(R7257)
The
earth
terminals