Daikin FTXS09HVJU - Page 203

SiUS04-904 FTXS15/18/24HVJU
192 Removal Procedure
12
Cut the clamp.  Clamps should be always
available.
Fix it as it was before.
5. Removal of the control PCB.
1
Release the 2 hooks on
the lower side, and then
the 2 hooks on the upper
side.
Remove the control PCB.
2
Control PCB (indoor unit)
S1: connector for the fan
motor
S21: HA
S26: connector for the
room temperature
thermistor
S32: connector for the
heat exchanger
thermistor
Step
Procedure Points