Daikin FTXS09HVJU - Page 213

SiUS04-904 RXS09/12DAVJU, RX09/12FAVJU
202 Removal Procedure
 The stop valve cover is united
with the shelter.
The US models have a drip
proof plate on the electrical
box mounting plate instead of
on the cover. Remove the 2
screws to remove the drip
proof plate.
 When reassembling, make
sure to fit the 5 hooks.
2. Removal of the panels.
1
Remove the 2 screws
(right, left) and lift the top
panel.
2
Remove the drip proof
plate.
Step
Procedure Points
(R10006)
Drip proof
plate
Screws
DAIKIN
INVE
R
TER
Top panel
(R10007)
DAIKIN
INVERTER
(R10008)
Drip proof plate