Why does Daikin FTXS50K2V1B outdoor unit emit water or steam during COOL or DRY operation?
If your Daikin Air Conditioner's outdoor unit is emitting water or steam during COOL or DRY operation, it's likely due to moisture in the air condensing on the cool surface of the outdoor unit piping.
Why does Daikin Air Conditioner outdoor unit emit water or steam during HEAT operation?
The water or steam coming from the outdoor unit of your Daikin Air Conditioner during HEAT operation is due to the frost on the outdoor unit melting during defrost operation.
How to fix Daikin Air Conditioner remote controller that does not work properly?
If your Daikin Air Conditioner remote controller isn't working well, the batteries may be weak or the remote may be malfunctioning. Replace all batteries with new, size AAA.LR03 (alkaline) batteries.
Why does my Daikin FTXS50K2V1B indoor unit give out odour?
If your Daikin Air Conditioner's indoor unit is emitting an odor, it's likely due to smells from the room, furniture, or cigarettes being absorbed into the unit and released with the airflow. Consider having the indoor unit professionally cleaned.
What to do if my Daikin FTXS50K2V1B does not operate and the OPERATION lamp is off?
If your Daikin Air Conditioner does not operate and the OPERATION lamp is off: * Set all indoor units to the same operation mode and confirm that the lamps flash. * If the operation mode is in AUTO, set all indoor unit operation modes to COOL or HEAT for a moment and check again that the lamps are normal.
Why is my Daikin Air Conditioner cooling or heating effect poor, and the OPERATION lamp is on?
If the cooling or heating effect of your Daikin Air Conditioner is poor and the OPERATION lamp is on, consider the following: * Ensure the air filters are clean. * Check for any obstructions blocking the air inlet or outlet of both the indoor and outdoor units. * Verify that the temperature setting is appropriate. * Confirm that all windows and doors are closed. * Make sure the airflow rate and direction are set correctly.
What to do if my Daikin Air Conditioner operation stopped suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, try these steps: * Clean the air filters. * Turn the breaker off, remove any obstructions, and then turn the breaker back on. Try operating the air conditioner with the remote controller.
What to do if Daikin FTXS50K2V1B operation stopped suddenly?
If your Daikin Air Conditioner suddenly stopped and the OPERATION lamp is flashing, try these steps: * Clean the air filters. * Ensure nothing is blocking the air inlet or outlet of the indoor and outdoor units. * Turn the breaker off, remove any obstacles, and turn it back on. Try operating the air conditioner with the remote controller. If the lamp continues to flash, contact your service shop. * If it's a multi-system, ensure all indoor units are set to the same operation mode.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240 V, 50 Hz |
| Type | Split System |
| Refrigerant | R32 |
| Noise Level (Outdoor) | 49 dB(A) |
Detects human presence to automatically adjust operation for energy saving.
Allows scheduling up to 4 timer settings daily for personalized comfort.
Adjusts airflow direction to prevent direct blowing on occupants.
Lowers outdoor unit noise level, useful for neighborhood consideration.
Essential safety guidelines classified as WARNING and CAUTION.
Detailed alerts regarding fire, electric shock, and hazardous materials.
Rules for proper use, avoiding damage, and environmental concerns.
Guidelines for selecting installation locations and electrical setup.
Identification and labeling of the indoor unit's main components.
Explanation of lamps, sensors, and the manual ON/OFF switch.
Details on the air filter, photocatalytic filter, and front panel access.
Labels for outdoor unit parts like inlets, outlets, sensors, and wiring.
Identifying the signal transmitter, receiver, display, and main buttons.
Explanation of temperature adjustment, ON/OFF, and fan setting buttons.
Buttons for selecting operation modes like ECONO/QUIET and COMFORT/SENSOR.
Buttons for setting timers, cancelling operations, and adjusting airflow.
Procedures for battery installation and wall mounting the remote.
How to adjust the indoor unit display's brightness level.
Steps for turning on power and setting the internal clock.
Instructions for initiating and terminating the air conditioner's run.
Explanations of AUTO, DRY, COOL, HEAT, and FAN modes.
How to change the target temperature using the remote control.
Recommendations for efficient operation and reducing electricity usage.
Activating automatic and multi-directional airflow patterns.
Setting specific positions for flaps and louvers during auto swing.
Adjusting the fan speed to different levels for comfort.
Directing airflow for enhanced comfort without direct contact.
Using the sensor for presence detection and energy saving.
How to choose Comfort Airflow, Intelligent Eye, or their combination.
Steps to turn off the Comfort Airflow and Intelligent Eye features.
In-depth notes on sensor detection, limitations, and interactions with other modes.
Activating maximum cooling/heating for rapid temperature adjustment.
Information on mode availability, duration, and compatibility.
Limiting power consumption for energy efficiency.
Reducing noise from the outdoor unit for nighttime comfort.
How to select the ECONO or Outdoor Unit Quiet modes.
Details on mode availability, priority, and limitations.
How to schedule automatic shutdown of the air conditioner.
Steps to deactivate a previously set OFF Timer.
How to schedule automatic startup of the air conditioner.
Steps to deactivate a previously set ON Timer.
Example of setting both ON and OFF timers simultaneously.
Overview of the weekly timer for personalized scheduling.
Step-by-step guide to inputting daily timer settings.
Adjusting the specific time for each timer event.
Setting the desired temperature for timer events.
Efficiently copying settings to multiple days.
Checking the details of programmed weekly timer events.
Turning off the weekly timer feature temporarily or permanently.
Removing specific timer entries from the schedule.
Clearing all programmed timer settings at once.
Guidelines for managing modes across multiple indoor units.
How priority room influences system behavior.
Enforcing a single mode across all connected indoor units.
Specific scenarios where priority room setting applies.
Instructions for opening and closing the front panel.
Methods for cleaning the front panel and air filters.
Detailed steps for safely removing and cleaning the front panel.
Proper procedure for reattaching the front panel securely.
Steps for taking out and washing the air filters.
How to put the cleaned filters back and close the unit.
Procedures for cleaning or replacing the photocatalytic filter.
Notes on how filter condition affects unit performance and air quality.
Routine checks and preparation for idle periods.
Advice on professional servicing and refrigerant details.
Explanations for flap movement, airflow reduction, and heat operation pauses.
Reasons for delayed start-up after operation stops or mode changes.
Simple troubleshooting steps before contacting support.
Diagnosing issues when the unit shows no signs of life.
Identifying causes for reduced cooling or heating efficiency.
Reasons for delayed heat output and outdoor fan operation.
Troubleshooting timer settings and indoor unit odors.
Critical symptoms requiring immediate professional attention.
Handling power interruptions and protecting against lightning strikes.
How to initiate the fault diagnosis mode on the remote.
Table correlating error codes with specific unit faults.
Interpreting LED patterns on the outdoor unit PCB for fault identification.
Interpreting LED patterns on the outdoor unit PCB for fault identification.
Visual summary of remote control functions and icons.
Visual guide to understanding operation mode and airflow direction symbols.
To Next Page
