Daikin RXR28EV1B8 - Heater Assembly, Humidifying Rotor, and Rotor Motor; Remove the heater assembly; Remove the humidifying rotor

Si001275 Heater Assembly / Humidifying Rotor / Humidifying Rotor Motor
Removal Procedure 3
2. Heater Assembly / Humidifying Rotor /
Humidifying Rotor Motor
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1. Remove the heater
assembly.
1
Remove the 4 screws
and remove the duct on
adsorption side.
2
Release the lead wire
for the humidifying
rotor motor from the
hooks.
3
Remove the 2 screws
and remove the heater
assembly.

The heater assembly should
be replaced as an assembly
set. (Disassembling of the
assembly may cause
malfunction.)
2. Remove the humidifying
rotor.
1
Release the fan motor
lead wire from the
hooks.
(R18766)
Duct on adsorption side
Heater assembly
(R18767)
Humidifying rotor motor
(R5800)
(R18768)
Fan motor lead wire
Hook
Hook