Main Functions SiBE05-722EE
36 Functions and Control
1.9 HOME LEAVE Operation
Outline HOME LEAVE operation is a function that allows you to record your preferred set temperature
and airflow rate. You can start your preferred operation mode simply by pressing the HOME
LEAVE button on the remote controller.
Detail 1. Start of Function
The function starts when the HOME LEAVE button is pressed in cooling operation, heating
operation (including POWERFUL operation), or while the operation is stopped. If this button is
pressed in POWERFUL operation, the POWERFUL operation is canceled and this function
becomes effective.
The HOME LEAVE button is ineffective in dry operation and fan operation.
2. Details of Function
A mark representing HOME LEAVE is indicated on the display of the remote controller. The
indoor unit is operated according to the set temperature and airflow rate for HOME LEAVE
which were recorded in the memory of the remote controller.
The LED (red) of indoor unit representing HOME LEAVE lights up. (It goes out when the
operation is stopped.)
3. End of Function
The function ends when the HOME LEAVE button is pressed again during HOME LEAVE
operation or when the POWERFUL button is pressed.
Cooling
HOME LEAVE operation
Start
Stop
(R19766)
Time
Set temp.
Normal operation
Normal operation
HOME LEAVE operation
set temp.
Heating
(R19656)
Time
Set temp.
HOME LEAVE operation
set temp.
HOME LEAVE operation
Normal operation
Normal operation
Start
Stop
To Next Page
Loading...
Need help?
General
