Daintree GE current WHS20 - Modify a Saved Profile;Editing Settings

Detailed Edit
Quick Edit
12
Daintree
™
Controls
|
WHS20/WHR1 User Manual
|
V1.0
2
Modify a Saved Profile
After creating a profile on the WHR1 or saving an existing profile from a WHS20 sensor, you can edit the
configuration parameters of the profile as needed.
1. Select the desired profile to open the profile details page.
2. Use UP/DOWN buttons to select the profile setting to edit.
3. Click the RIGHT button to edit the selected item.
NOTE: Detailed instructions for editing the Occupancy Detection and
Ambient Light Detection settings are provided later in this Guide.
1
2
3
Editing Settings
Select from Quick and/or Detailed visual editing of settings
• Quick Edit mode provides the user with the ability to edit settings without leaving the profile details screen.
Quick Edit mode can be used by pressing the CENTER button on the setting that the user would like to edit.
• Detailed Edit mode provides the user with a graphical view of the setting to be edited for more guidance.
Detailed Edit mode can be used by pressing the RIGHT
button on the setting that the user would like to edit.
Adjustments are automatically saved