Daitsu FMCD-04 - Users Interface; Remote Control Handset

Page 51 of 58
SK2019 FMCD-V-ECM-001
Remote Control Handset
Attention
When unit with handset is the master unit, its
settings are automatically sent to the slave units;
Auto Cool-Heat operation will be applicable in 4-
pipe system only.
“Swing” function is not applicable.
European version only uses degree C setting.
Swing
It is not available.
Interchange
o
F and
o
C on Display
Press up and down buttons for 3
seconds, then release.