Need help?Do you have a question about the Daitsu FMCD*ECM series and is the answer not in the manual?
General| Brand | Daitsu |
|---|---|
| Model | FMCD*ECM series |
| Category | Air Conditioner |
| Language | English |
Provides a general overview of the High-Wall Unit's design, features, and appearance.
Details general specifications for the FMCD-V-EC Series 3-Speed units.
Presents coil specifications for 2-pipe systems, including dimensions and construction.
Shows detailed dimensional drawings for various FMCD unit models.
Provides information on 2-way and 3-way valve bodies and a differential pressure chart.
Guides the installation process for the high-wall unit, including location and mounting.
Covers maintenance tasks and preparations, such as opening covers and purging.
Details the process of connecting pipes with the unit's valve assembly.
Details the SK-NCFMCD-001 controller for high-wall S unit configurations.
Provides the wiring diagram for the SK-NCFMCD-001 controller.
Explains the DIP switch settings for unit configuration and operation.
Outlines the control logic for 2-pipe systems in various modes.
Details control logic for 4-pipe systems in various operating modes.
Describes the operation and profiles of the sleep mode.
Explains the auto fan speed regulation in cool and heat modes.
Details louver control and fixed positions for remote and wall pad operation.
Describes the auto-restart function and parameter saving.
Covers the operation of the unit's on-unit control panel.
Explains the status indication of power and operation LEDs.
Lists LED error codes and their corresponding remedies for units.
Details LED error indications for master/slave communication failures.
Introduces the networking system, including master-slave configurations.
Guides the setup process for master-slave network connections.
Explains global and addressable communication methods for master-slave networks.
Provides wiring diagrams for master-slave network connections.
Details the SK-NCFMCD-002 controller for high-wall W unit configurations.
Provides the wiring diagram for the SK-NCFMCD-002 controller.
Explains onboard configuration using DIP switches for the controller.
Details control logic specifications for the limited function controller.
Describes LED indications for the limited function controller.
Lists error descriptions and remedies for the limited function controller.
Details the Open Modbus protocol, supported functions, and error codes.
Explains the functions and operation of the remote control handset.
Details the wired wall pad display and its operational guidelines.
Provides detailed operational guidelines for the wired wall pad.
Guides the setting of the EC unit's RPM using the wired wall pad.
To Next Page
