Daitsu FMCD*ECM series - Networking System

Page 38 of 62
SK2014‐SON‐002‐TechMnl‐FMCD‐003

C.3. NetworkingSystem

C.3.1. Master‐SlaveNetwork

ThecontrolPCBcanbeseteitherasamasterunitorslaveunit.
MASTERUNITFUNCTION
a) Themasterunitsendsdataregardingitssettingtotheslaveunit.
b) ThemasterunitsettingsareunitON/OFF,Mode,FanSpeed,Timer,Clock,SetTemperature,SwingFunction,
andSleepFunction
forhandsetoperation.
c) ThemasterunitsettingsareunitON/OFF,Mode,FanSpeed,Timer,Clock,SetTemperature,SwingFunction,
andSleepFunctionforwallpadoperation.
SLAVEUNITFUNCTION
a) Theslaveunitreceivesdataregardingitssettingsfromthemasterunit.
b) The slave unit is allowed to change
 to a locally desired setting by local controller as long as there are no
subsequentchangestothesettingsofthemasterunit.
c) TheslaveunitscanbesetindividuallyfortimerON/OFFfunctionbyhandsetorwallpad.Thehandsetcannot
overridethewallpadtimerandclock
setting.

