Spyder 3 CL User's Manual PRELIMINARY 113
DALSA 03-032-20008-03
10 Appendix D
10.1 Revision History
Revision
Number
Change Description
00 Preliminary release.
01 -Revised CCD Shift Direction section. The get scd 3 command added to the list
of get commands, page 83. The command scd 3: externally controlled/reverse
direction.
-Responsivity, random noise, SEE,, and NEE specifications revised. Previous
specifications cited 8 bit numbers, not the correct 12 bit. Page 7.
-Revised responsivity graph added, page 12.
02 -Page 11: Added the following note to the Sensor Shift Direction section:
Note: The CCD shift direction is controlled through the serial interface. Use the
software command scd to determine whether the direction control is set via
software control or via the Camera Link control signal on CC3. Refer to the
CCD Shift Direction section in this manual, page 49, for details.
-Page 20: Revised Table 7 to the following: CC1: EXSYNC, CC2: PRIN, CC3:
Direction, CC4: Spare.
-4k model, S3-20-04k40-00-R, added to manual. Including all specs and
mechanicals, etc.
03 -4k mechanical in the performance spec revised to the correct: 65(h) x 53.7(l) x
85(w).
-Dark current diagrams in Appendix A were missing labels. Labels restored.
-Mechanicals updated to show RoHS-compliant stickers, p. 17, 31, 32.
-LUT information for the 4k model added: pages 25 and 26, 55 and 56, 70 to 72,
and 83.
To Next Page
Loading...
Need help?
General