6.2.4. ETHERNET (Dual Ethernet port)
A Dual Ethernet port with a built-in 2-port Ethernet switch
(10/100 Mbit/peer-to-peer) is provided enabling remote control
via Ethernet and allows the following physical network topologies:
▪ Star topology
Recommended standard,
▪ Daisy chain topology
For a maximum of three devices,
▪ or a combination of both topologies.
Note: A detailed description of remote control via Ethernet is
given in the technical information TI 310 (d&b code
D5310.EN) which can be downloaded from the d&b website
at www.dbaudio.com.
LED indicators
The two LED indicators above the respective connector in use
indicate the following states:
Green
Illuminates permanently when the device is connected
to an active network and flashes as long as a data
stream is transmitted.
Yellow ▪ Is off when the speed is 10 Mbit.
▪ Illuminates permanently when the speed is
100 Mbit.
Network topologies
Star topology
Daisy chain topology for a
maximum of three devices
Combined topology
d&b 10D/30D Manual 1.10 en16
To Next Page
Loading...
