Dane Technologies, Inc. WheelChair Mover Owners Manual 54
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com 970-068 6/19/17 Rev F
To use the Gas Bottle Holder:
Document Holder Option (P/N 100-227)
The Document Holder on the front of the machine is designed to hold clipboards and
other documents. There is no special maintenance necessary for the Document Holder.
Installation:
The Document Holder is shipped installed if ordered with the unit. If shipped separately:
1. Using a #20 Torx wrench, remove 4 screws at the bottom of the top cover.
2. Install the Document Holder using the 5 screws provided. Do not over tighten the
screws.
Tighten screw
against cylinder
Slide gas cylinder
down through rings
To Next Page
Loading...