Dane Technologies WM2000 - Page 62

Dane Technologies, Inc. WheelChair Mover Owners Manual 62
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com 970-068 6/19/17 Rev F
Standard
Bariatric
Parameter
WCM
alone
WCM
and 550
lb patient
WCM
alone
WCM and 550
lb patient
WCM and
750 lb
patient
Static Stability
Downhill
29
7
29
7
Tested to
8.3
Static Stability Uphill
15
9
15
9
Tested to
8.3
Static Stability
Sideways
8
10
8
10
Not tested
Static Stability
Rearward tip
30
>30
30
>30
Tested to
8.3
Theoretical Range
81 km
37 km
36 km
37 km
17 km
The Dane Technologies WheelChair Mover has been tested and or manufactured
according to the following standards:
Standard
Description
Results
Comments
ANSI/RESNA WC Volume 1 and 2 -1998
Vol 1 - Section 1
Static Stability
See Measurements
Specifications Section
Vol 2 - Section 2
Dynamic Stability
See Measurements
Specifications Section
Vol 2 - Section 3
Brakes
Passed
Vol 2 - Section 4
Energy Consumption
See Measurements
Specifications Section
Vol 1 - Section 5
Dimension
See Measurements
Specifications Section
Vol 2 - Section 6
Max, Speed, Accel, Decel
See Measurements
Specifications Section
Vol 1 - Section 7
Measurement of seating and
wheel dimensions
NA
Vol 1 - Section 8
Static, impact, and fatigue
Drum tested,
Drop tested,
impact and
strength
passed.
124471 drum
cycles, 4145
drops;
Vol 2 - Section 9
Climate
Passed
Not rain tested
Vol 2 - Section 10
Obstacle climbing
See Measurements
Specifications Section
Vol 2 - Section 14
Power and Control System
Passed
Vol 1 - Section 15
Documentation and Labeling
Passed
Vol 1 - Section 16
Ignition of upholstered parts
NA
No upholstery
present
Vol 1 - Section 21
EMI
Passed
Tested from 25MHz
to 2.5 GHz