8-94 Bus Feedback 1
Range: Function:
0 N/A* [-200 - 200 N/A] Write a feedback to this parameter via the serial communication port or fieldbus option. This pa-
rameter must be selected in par.20-00
Feedback 1 Source
, par.20-03
Feedback 2 Source
or par.
20-06
Feedback 3 Source
as a feedback source.
8-95 Bus Feedback 2
Range: Function:
0 N/A* [-200 - 200 N/A] See par.8-94
Bus Feedback 1
for further details.
8-96 Bus Feedback 3
Range: Function:
0 N/A* [-200 - 200 N/A] See par.8-94
Bus Feedback 1
for further details.
3 Parameter Description ADAP-KOOL
®
Drive Programming Guide
102
MG.11.N1.02 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
Need help?
General