Danfoss AK-CH 650

AK-CH 650 Capacity controller RS8ER302 © Danfoss 2016-02 57
3 - Display setup
Display
The following can be read for the four outputs..
Comp. control sensor
P0
P0 bar (abs)
S3
S4
Ss
Sd
Cond. control sensor
Pc
Pc Bar (abs)
S7
Unit readout
Choose whether readings are to be in SI units (°C and bar) or
(US-units °F and psi)
Setup Display
1. Go to Conguration menu
2. Select Display setup
3. Dene which readings are to be
shown for the individual outputs
In our example, separate displays
are not used. The setting is
included here for information.
Conguration - continued