Danfoss AK-LM 330 - Page 56

56 RS8FR302 © Danfoss 2015-08 AK-LM 330
5. Repeat settings for the other thermostats
6. Select pressostats
7. Overview for pressostats
8. Move on to settings for pressostat 1
!
9. Repeat settings for the other pressostats
10. Select voltage signals
11. Overview for voltage signals
Check of settings - contiuned
!
When this function is set to 'YES', a relay will be reserved which couples
with the pressostat. Denition of the connection point must be done
during the I/O conguration.
(In our example, the setting is NO in Pressostat 1 and YES in Pressostat 2).
Remember the settings at the bottom of the pages – the ones that can
only be seen via the ”Scroll bar”.”