[39] Korean Part of Language package 2
[40] Japanese Part of Language package 2
[41] Turkish Part of Language package 4
[42] Traditional Chinese Part of Language package 2
[43] Bulgarian Part of Language package 3
[44] Serbian Part of Language package 3
[45] Romanian Part of Language package 3
[46] Hungarian Part of Language package 3
[47] Czech Part of Language package 3
[48] Polish Part of Language package 4
[49] Russian Part of Language package 3
[50] Thai Part of Language package 2
[51] Bahasa Indonesian Part of Language package 2
1-20 Motor Power [kW]
Range: Function:
Size re-
lated
*
[0.12-670 hp [0.09 -
500 kW]]
Enter the nominal motor power (in kW) according to the motor
nameplate data. The default value corresponds to the nominal
rated output of the unit.
This parameter cannot be adjusted while the motor is running.
Depending on the choices made in par. 0-03
Regional Set-
tings
, either par. 1-20 or par. 1-21
Motor Power
is made invisible.
1-21 Motor Power [HP]
Range: Function:
Size re-
lated
*
[0.09-500 hp] Enter the nominal motor power (in HP) according to the motor
nameplate data. The default value corresponds to the nominal
rated output of the unit.
This parameter cannot be adjusted while the motor is running.
Depending on the choices made in par. 0-03
Regional Set-
tings
, either par. 1-20 or par. 1-21
Motor Power
is made invisible.
1-22 Motor Voltage
Range: Function:
Size re-
lated
*
[10 - 1,000 V] Enter the nominal motor voltage according to the motor name-
plate data. The default value corresponds to the nominal rated
output of the unit.
4. How to Program
VLT
®
HVAC DRIVE High Power
Instruction Manual
78
MG.11.F1.22 - VLT
®
is a registered Danfoss trademark.
4
To Next Page
Loading...
