Danfoss FC 100 - Page 96

Par. No. # Parameter description Default value 4 set-up Change during operation Conver-
sion index
Type
8-9* Bus Jog/Feedback 8-90 Bus Jog 1 Speed 100 RPM All set-ups TRUE 67 Uint16 8-91 Bus Jog 2 Speed 200 RPM All set-ups TRUE 67 Uint16
8-94 Bus Feedback 1 0 N/A 1 set-up TRUE 0 N2
8-95 Bus Feedback 2 0 N/A 1 set-up TRUE 0 N2
8-96 Bus Feedback 3 0 N/A 1 set-up TRUE 0 N2
4. How to Program
VLT
®
HVAC DRIVE High Power
Instruction Manual
96 MG.11.F1.22 - VLT
®
is a registered Danfoss trademark.
4