Danfoss FC 301

Line power connection for frame sizes A1, A2 and A3:
Line connector A5 (IP 55/66) Enclosure
When the disconnector is used (A5 enclosure), the PE must be mounted on the left side of the
drive.
Line connection B1 and B2 (IP 21/NEMA Type
1 and IP 55/66/ NEMA Type 12) enclosures
VLT
®
AutomationDrive FC 300 Instruction
Manual
3. How to Install
MG.33.A9.22 - VLT is a registered Danfoss trademark 23
3