4.1.2. How to Program on the Numerical Local Control Panel
The following instructions are valid for the nu-
merical LCP (LCP 101):
The control panel is divided into four
functional groups:
1. Numerical display.
2. Menu keys and LEDs - changing pa-
rameters and switching between dis-
play functions.
3. Navigation keys and indicator lights
(LEDs).
4. Operation keys and LEDs.
4. How to Program
VLT
®
AutomationDrive FC 300 Instruction
Manual
46
MG.33.A9.22 - VLT is a registered Danfoss trademark
4
To Next Page
Loading...
