Danfoss FC 301 User Manual

Available Literature for the FC 300
-
The VLT
®
AutomationDrive FC 300 Instruction Manual provides the information needed
to get the drive up and running.
-
The VLT
®
AutomationDrive FC 300 Design Guide contains all the technical information
about the drive design and applications including encoder, resolver and relay options.
-
The VLT
®
AutomationDrive FC 300 Profibus Instruction Manual provides the information
required for controlling, monitoring and programming the drive via aProfibus serial com-
munication bus.
-
The VLT
®
AutomationDrive FC 300 DeviceNet Instruction Manual provides the informa-
tion required for controlling, monitoring and programming the drive via a DeviceNet serial
communication bus.
-
The VLT
®
AutomationDrive FC 300MCT 10Instruction Manual provides information for
installation and use of the software on a PC.
-
The VLT
®
AutomationDrive FC 300 IP 21/ Type 1 Instruction provides information for
installing the IP 21/ Type 1 option.
-
The VLT
®
AutomationDrive FC 300 24 V DC Backup Instructions provide information for
installing the 24 V DC backup option.
Danfoss Drives technical literature is also available online at www.danfoss.com/drives.
1.1.2. Approvals
1.1.3. Symbols
Symbols used in this Instruction Manual.
NOTE
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
1. How to Read this Instruction Manual
VLT
®
AutomationDrive FC 300 Instruction
Manual
4 MG.33.A9.22 - VLT is a registered Danfoss trademark
1

Danfoss FC 301 Specifications

General

Brand	Danfoss
Model	FC 301
Category	Controller
Language	English