Danfoss FC 301 User Manual

When changing the function of S201, S202 or S801, be careful not to force the switch
over. Removing the LCP fixture (cradle) when operating the switches is recommen-
ded. The switches must not be operated while the adjustable frequency drive is
powered.
3. How to Install
VLT
®
AutomationDrive FC 300 Instruction
Manual
40 MG.33.A9.22 - VLT is a registered Danfoss trademark
3

Danfoss FC 301 Specifications

General

Type	AC Drive
Output frequency	0-1000 Hz
Enclosure rating	IP20, IP21, IP55
Control method	Sensorless vector control
Communication options	RS-485, CANopen, Profibus DP
Ambient temperature	-10°C to +50°C
Supply voltage	200-240 V, 380-500 V, 525-690 V
Protection class	IP20, IP21, IP55
Cooling method	Forced air
Relative humidity	5% to 95% (non-condensing)
Storage temperature range	-25 to 70 °C (-13 to 158 °F)