Danfoss FCM305 56

FCM 300 Series
MG.03.B6.2G - VLT is a registered Danfoss trademark
Parameter Group 6: Technical functions
✭ = General factory setting - also applying to spare part unit,
HH
HH
H = HVAC setting,
II
II
I = Industrial setting, ( ) = parameter
window text. [ ] = value for use in communication via serial communication port
626 Nameplate: Database identification no.
(DATABASE VER.)
Value:
Depends on unit
Function:
The key data of the unit can be read out via the
display or the serial communication port.
628 Nameplate: Application option type
(APP. OPTION)
Value:
Function:
The key data of the unit can be read out via the
display or the serial communication port.
630 Nameplate: Communication option type
ordering no. (COM. ORDER NO)
Value:
Function:
The key data of the unit can be read out via the
display or the serial communication port.
632 BMC software identification
(BMC SW VERSION)
Value:
Function:
The key data of the unit can be read out via the
display or the serial communication port.
633 Motor database identification
(MOTOR DATA VERS.)
Value:
Function:
The key data of the unit can be read out via the
display or the serial communication port.
634 Unit identification for communication
(UNIT ID)
Value:
Function:
The key data of the unit can be read out via the
display or the serial communication port.
635 Software part No
(SW. PART NO:)
Value:
Function:
Indicates the software part No.
For information on the Profibus parameter group
800 - 900, see the FCM Profibus manual
MG.03.EX.YY.
14-5
625 Nameplate: LCP identification no.
(LCP VERSION)
Value:
Depends on unit
Function:
The key data of the unit can be read out via the
display or the serial communication port.
For example: ID 1,42 2 kB.