Danfoss H1B 060

Torque for P0050
Size 060/080 110 160/210/250
Torque
66 N•m [49 lbf•ft] 115 N•m [85 lbf•ft] 213 N•m [157 lbf•ft]
3. Lubricate and install new O-ring (P0030) and install servo piston cover (P0010).
4. Using a 8 mm or 10 mm internal hex install screws (P0020). Torque to 115 N•m [85 lbf•ft].
Service Manual
H1 Bent Axis Motors, Size 060/080/110/160/210/250 cm3
Minor repair
©
Danfoss | August 2018 AX00000025en-US0504 | 61