Danfoss MCA 121 User Manual

2.1.7 Available literature
Available Literature for the frequency converter
- The VLT AutomationDrive Operating Instructions
provide the neccessary information for getting
the frequency converter up and running.
- The VLT AutomationDrive Design Guide entails all
technical information about the frequency
converter design and applications including
encoder, resolver and relay options.
- The VLT AutomationDrive MCT 10 Operating
Instructions provide information for installation
and use of the software on a PC.
- The VLT AutomationDrive IP21 / Type 1
Instruction provides information for installing the
IP21 / Type 1 option.
- The VLT AutomationDrive 24 V DC Backup
Instruction provides information for installing the
24 V DC Backup option.
Danfoss Drives technical literature is also available online
at www.danfoss.com/drives.
2.1.8
ODVA Conformance
The EtherNet/IP option is conformance tested to ODVA
add. industrial graded.
2.1.9
Abbreviations
Abbreviation Definition
API Actual Packet Interval
CC Control Card
CIP Common Industrial Protocol
CTW Control Word
DHCP Dynamic Host Configuration Protocol
EIP EtherNet/IP
EMC Electromagnetic Compatibility
I/O Input/Output
IP Internet Protocol
LCP Local Control Panel
LED Light Emitting Diode
LSB Least Significant Bit
MAR Major Recoverable fail
MAU Major Unrecoverable fail
MAV Main Actual Value (actual output)
MSB Most Significant Bit
MRV Main Reference Value
N/A Not applicable
ODVA Open DeviceNet Vendor Association
PC Personal Computer
PLC Programmable Logic Controller
PNU Parameter Number
REF Reference (= MRV)
RTC Real Time Clock
STP Spanning tree Protocol
STW Status Word
Introduction MCA 121 EtherNet/IP
MG.90.J3.02 - VLT
®
is a registered Danfoss trademark 5
2 2

Danfoss MCA 121 Specifications

General

Brand	Danfoss
Model	MCA 121
Category	Media Converter
Language	English