Danfoss MCA 121 - 3.1.7 EMC Precautions

3.1.6 Recommended Design Rules
While designing Ethernet networks special attention and caution must be taken regarding active network components.
While designing a network for line topology it is important to notice that a small delay is added with each every switch in
the line.
It is not recommended to connect more than 32 frequency converters in a line at any API. Exceeding the recommended
design rules, may result in failing communication.
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
AutomationDrive
VLT
Max. 32 drives
How to Install MCA 121 EtherNet/IP
10 MG.90.J3.02 - VLT
®
is a registered Danfoss trademark
3
3