Danfoss PVG 32 Technical Information

Set pressure difference between pump pressure and LS signal = 20 bar [290 psi].
The oil flow is dependent on the pressure difference between the pump pressure and the LS signal.
Normally the pressure difference is set at the LS pump regulator. Also take into consideration pressure
drop from the pump to the PVG valve group. e.g. long pipeline.
Oil flow characteristics for PVB at
@ pressure drop at max. main spool travel @ pressure drop for open spool in neutral position
Load-independent, pressure-compensated LS pressure limiting, pressure-compensated PVB
Technical Information
PVG 32 Proportional Valve Group
Technical characteristics
40 |
©
Danfoss | August 2017 520L0344 | BC00000038en-US0802

Danfoss PVG 32 Specifications

General

Category	Control Unit
Maximum working pressure	350 bar
Size	32
Type	Proportional Valve
Maximum operating pressure	420 bar
Porting pattern	ISO 4401
Electrical connection	AMP